PEEK board qualities of PEEK board qualities of the EEK board ° the PEEK board qualities of PEEK board qualities of EEK board ° Shenzhen Jinyuan Thai Plastic Materials Co., Ltd. Tel :0755 -86,007,606 Fax 755 -86204886 Mobile: 13,322,933,978 QQ: 75,762,293 Contact: Mr. Yuan, mainly engaged in : special engineering plastics, engineering plastics, insulation materials, screen printing sheet, silicone material, anti-static material. Special Agent: Germany, Japan, Europe, Korea, the United States, Taiwan and other imported products. 

 High temperature thermoplastics, with a high glass transition temperature (143 ° C) and melting point (334 ° C) Temperature of deflection under load up to 316 ° C (30% glass fiber or carbon fiber reinforced grades), and long-term use at 250 ℃, and other high temperature plastics, such as the PI PPS, PTFE, the PPO, etc., compared to nearly 50 ° C above the temperature upper limit; PEEK resin is not only excellent heat resistance than other high temperature plastics, and has high strength, high modulus, high fracture toughness and excellent dimensional stability; the PEEK resin can maintain high strength at elevated temperatures, 
 At 200 ° C, the flexural strength of about 24MPa at 250 ℃ for bending strength and compressive strength are still 12 ~ 13MPa; the greater rigidity of the PEEK resin, good dimensional stability, the linear expansion coefficient is small, very close to the metal aluminum; has excellent chemical resistance, in the usual chemicals, concentrated sulfuric acid can dissolve or destroy it, similar to its corrosion resistance and nickel steel, itself a flame retardant, released under fire conditions less smoke and toxic gases, anti-radiation and strong; the toughness of the PEEK resin 
 Excellent resistance to fatigue alternating stress is the most outstanding of all plastic, comparable with the alloy material; PEEK resin with outstanding tribological properties, resistance to sliding wear and fretting wear performance, especially in the under 250 ℃ high wear resistance and low coefficient of friction; the PEEK resin is easy extrusion and injection molding, machining performance, forming more efficient. In addition, PEEK, with self-lubricating, easy processing, insulation, stability, hydrolysis resistance, excellent performance, PEEK has excellent performance, good mechanical properties, high temperature resistance, excellent chemical resistance, making it the most common high-grade plastics 

 Main features: 



 1, the PEEK-1000 (gray brown) 
 The PEEK (2) PEEK-1000 pure polyether ether ketone resin as raw material to manufacture the best in the toughness of all PEEK level, the best impact. PEEK-1000 can use the most convenient way to disinfection disinfection (steam, dry heat, ethanol, and Y-ray), and manufacture of raw material components of the PEEK-1000 in line with the provisions of the EU and the U.S. FDA on food should be, these features make it suitable in medical, pharmaceutical and food processing industry is a very common application. 
 2, the PEEK-HPV (black) by adding the results of PTFE, graphite and carbon fiber, PEEK-of HPV as a bearing grade plastic. Superior friction properties (low coefficient of friction, wear resistance, high peak pressure limit) makes this level of friction applications become an ideal material. 
 3, the material of the PEEK-GF30 (brownish gray) filled with 30% glass fiber reinforced grade plastic, better stiffness and creep resistance, and better dimensional stability than the PEEK-1000, manufacture of structural parts more ideal. At high temperatures can be a long time under a fixed load. Such as the use of PEEK-GF30 as sliding pieces should carefully test its adaptability to scratch the mating surface because the glass fiber. 
 4, the PEEK-CA30 (black) of the material filling 30% of carbon fiber reinforced, have better mechanical properties (higher modulus of elasticity, mechanical strength and creep) and more wearable than the PEEK-GF30, and add carbon fiber reinforced plastic than unreinforced PEEK plastic has a thermal conductivity of 3.5 times - faster heat dissipation from the bearing surface. 
 Edit this paragraph five, the PEEK plate features: 
 Air the maximum allowable operating temperature is very high (260 degrees continue to work, short-term up to 310 degrees), mechanical strength, rigidity and high hardness, high temperature resistance, excellent chemical resistance and resistance to hydrolysis, excellent wear resistance and friction performance, high creep strength, excellent dimensional stability, outstanding UV resistance, excellent resistance to high-energy radiation performance, inherently low flammability and combustion of smoke less